Fire Officer
BEFORE APPLYING
Your FIDO account will only display eligibility for certification once you have met ALL requirements for a specific discipline/level.
If you have ever tested with the commission or held certification, please do not create a new FIDO account if you are unable to log in. Contact the commission at 512-936-3838 for assistance.
Log into your FIDO account to check your current eligibility or to create an account.
REQUIREMENTS
To become certified in Fire Officer I you must:
- Hold Basic Structural Fire Protection, Aircraft Rescue Fire Fighting, or Marine Fire Protection AND Fire Service Instructor I certification
- Complete a commission approved Fire Officer I training program
- Qualify for and pass the Fire Officer I exam; you must have an unexpired exam score on file to qualify for certification
- Apply and pay for certification. The quickest option is to pay with a credit card.
You may be exempt from the exam requirement if you have never been certified and hold an IFSAC seal or TEEX Proboard certificate.
IFSAC SEALS
If you hold a Fire Officer I IFSAC seal from another jurisdiction, you do not have to take the commission's Fire Officer I exam.
Add this seal to your FIDO account by uploading a copy of each to the Submissions page, Register IFSAC Seal button.
TEEX PROBOARD
If you obtained a TCFP course completion certificate from TEEX indicating that your course was completed within the past 2 years, you may not have to take the commission's exam.
It is important to note that the certificate of completion must have the TEEX pro board seal number and the TCFP Training Prior Approval (TPA) number printed on the certificate in order to comply with §439.1 (2).
Add this certificate to your FIDO account by uploading a copy of each to the Submissions page, Register TEEX Proboard button.
PREREQUISITES
Hold basic structural fire protection, aircraft rescue fire rescue, or marine fire protection certification AND instructor level I certification.
TRAINING
Complete a commission-approved Fire Officer I training program as outlined in Chapter 9 of the commission's Certification Curriculum Manual or document completion of the required college course listed in 451.3(B)(iii).
View Chapter 9 (PDF) .
TESTING
Online Test Site Schedule
Check online testing sitesarrow_right_altRegional Testing Site Schedule
Check regional testing schedulearrow_right_altView Academy Examination Procedures here (PDF).
If your exam scores have expired, retesting is required to be eligible for certification (in addition to any other prerequisites). Contact the training and testing division of the commission at 512-936-3811 or testing@tcfp.texas.gov for more information.
If you have valid exam scores in FIDO, please continue to the next step.
APPLY FOR CERTIFICATION
Step 1: Log into FIDO.
Step 2: Click on the Applications on the left menu.
Step 3: Click on the green Apply button (if it is not green, you are not eligible).
Step 3: Follow the instructions to create an invoice.
Step 4: Click on Invoices on the left menu
Step 5: Click the green Pay link on the far right of the screen.
Step 6: Follow the instructions on Texas.gov to enter credit card information for payment to have certificate issued immediately.
VIEW AND PRINT CERTIFICATE
Step 1: Log into FIDO
Step 2: Click Records on the left menu
Step 3: Click Certifications within the green bar
Step 4: Click Print next to the name of the certificate. This will open a PDF that can be downloaded and saved or printed. The commission does not mail hard copies of certificates.
APPLY FOR IFSAC SEALS
An IFSAC Seal is available in this discipline. Steps to apply are found here.
BEFORE APPLYING
Your FIDO account will only display eligibility for certification once you have met ALL requirements for a specific discipline/level.
If you have ever tested with the commission or held certification, please do not create a new FIDO account if you are unable to log in. Contact the commission at 512-936-3838 for assistance.
Log into your FIDO account to check your current eligibility or to create an account.
REQUIREMENTS
To become certified in Fire Officer II you must:
- Hold Basic Structural Fire Protection, Aircraft Rescue Fire Fighting, or Marine Fire Protection AND Fire Service Instructor I certification AND Fire Officer I certification
- Complete a commission approved Fire Officer II training program
- Qualify for and pass the Fire Officer II exam; you must have an unexpired exam score on file to qualify for certification
- Apply and pay for certification. The quickest option is to pay with a credit card.
You may be exempt from the exam requirement if you have never been certified and hold an IFSAC seal or TEEX Proboard certificate.
IFSAC SEALS
If you hold a Fire Officer II IFSAC seal from another jurisdiction, you do not have to take the commission's Fire Officer II exam.
Add this seal to your FIDO account by uploading a copy of each to the Submissions page, Register IFSAC Seal button.
TEEX PROBOARD
If you obtained a TCFP course completion certificate from TEEX indicating that your course was completed within the past 2 years, you may not have to take the commission's exam.
It is important to note that the certificate of completion must have the TEEX pro board seal number and the TCFP Training Prior Approval (TPA) number printed on the certificate in order to comply with §439.1 (2).
Add this certificate to your FIDO account by uploading a copy of each to the Submissions page, Register TEEX Proboard button.
PREREQUISITES
Hold basic structural fire protection, aircraft rescue fire rescue, or marine fire protection certification AND instructor level I certification AND fire officer I certification.
TRAINING
Complete a commission-approved Fire Officer II training program as outlined in Chapter 9 of the commission's Certification Curriculum Manual or document completion of the required college course listed in 451.203(B)(iii).
View Chapter 9 (PDF) .
TESTING
Online Test Site Schedule
Check online testing sitesarrow_right_altRegional Testing Site Schedule
Check regional testing schedulearrow_right_altView Academy Examination Procedures here (PDF).
If your exam scores have expired, retesting is required to be eligible for certification (in addition to any other prerequisites). Contact the training and testing division of the commission at 512-936-3811 or testing@tcfp.texas.gov for more information.
If you have valid exam scores in FIDO, please continue to the next step.
APPLY FOR CERTIFICATION
Step 1: Log into FIDO.
Step 2: Click on the Applications on the left menu.
Step 3: Click on the green Apply button (if it is not green, you are not eligible).
Step 3: Follow the instructions to create an invoice.
Step 4: Click on Invoices on the left menu
Step 5: Click the green Pay link on the far right of the screen.
Step 6: Follow the instructions on Texas.gov to enter credit card information for payment to have certificate issued immediately.
VIEW AND PRINT CERTIFICATE
Step 1: Log into FIDO
Step 2: Click Records on the left menu
Step 3: Click Certifications within the green bar
Step 4: Click Print next to the name of the certificate. This will open a PDF that can be downloaded and saved or printed. The commission does not mail hard copies of certificates.
APPLY FOR IFSAC SEALS
An IFSAC Seal is available in this discipline. Steps to apply are found here.
BEFORE APPLYING
Your FIDO account will only display eligibility for certification once you have met ALL requirements for a specific discipline/level.
If you have ever tested with the commission or held certification, please do not create a new FIDO account if you are unable to log in. Contact the commission at 512-936-3838 for assistance.
Log into your FIDO account to check your current eligibility or to create an account.
REQUIREMENTS
To become certified in Fire Officer III you must:
- Hold Basic Structural Fire Protection, Aircraft Rescue Fire Fighting, or Marine Fire Protection AND Fire Service Instructor II certification AND Fire Officer II certification
- Document completion of ICS-300: Intermediate Incident Command System
- Complete a commission approved Fire Officer III training program
- Qualify for and pass the Fire Officer III exam; you must have an unexpired exam score on file to qualify for certification
- Apply and pay for certification. The quickest option is to pay with a credit card.
You may be exempt from the exam requirement if you have never been certified and hold an IFSAC seal or TEEX Proboard certificate.
IFSAC SEALS
If you hold a Fire Officer III IFSAC seal from another jurisdiction, you do not have to take the commission's Fire Officer III exam.
Add this seal to your FIDO account by uploading a copy of each to the Submissions page, Register IFSAC Seal button.
TEEX PROBOARD
If you obtained a TCFP course completion certificate from TEEX indicating that your course was completed within the past 2 years, you may not have to take the commission's exam.
It is important to note that the certificate of completion must have the TEEX pro board seal number and the TCFP Training Prior Approval (TPA) number printed on the certificate in order to comply with §439.1 (2).
Add this certificate to your FIDO account by uploading a copy of each to the Submissions page, Register TEEX Proboard button.
PREREQUISITES
Hold basic structural fire protection, aircraft rescue fire rescue, or marine fire protection certification AND instructor level II certification AND fire officer II certification.
Document completion of ISC-300: Intermediate Incident Command System. Upload this training through the Submissions page, Professional Development button in FIDO.
TRAINING
Complete a commission-approved Fire Officer III training program as outlined in Chapter 9 of the commission's Certification Curriculum Manual or document completion of the required college course listed in 451.303(C).
View Chapter 9 (PDF) .
TESTING
Online Test Site Schedule
Check online testing sitesarrow_right_altRegional Testing Site Schedule
Check regional testing schedulearrow_right_altView Academy Examination Procedures here (PDF).
If your exam scores have expired, retesting is required to be eligible for certification (in addition to any other prerequisites). Contact the training and testing division of the commission at 512-936-3811 or testing@tcfp.texas.gov for more information.
If you have valid exam scores in FIDO, please continue to the next step.
APPLY FOR CERTIFICATION
Step 1: Log into FIDO.
Step 2: Click on the Applications on the left menu.
Step 3: Click on the green Apply button (if it is not green, you are not eligible).
Step 3: Follow the instructions to create an invoice.
Step 4: Click on Invoices on the left menu
Step 5: Click the green Pay link on the far right of the screen.
Step 6: Follow the instructions on Texas.gov to enter credit card information for payment to have certificate issued immediately.
VIEW AND PRINT CERTIFICATE
Step 1: Log into FIDO
Step 2: Click Records on the left menu
Step 3: Click Certifications within the green bar
Step 4: Click Print next to the name of the certificate. This will open a PDF that can be downloaded and saved or printed. The commission does not mail hard copies of certificates.
APPLY FOR IFSAC SEALS
An IFSAC Seal is available in this discipline. Steps to apply are found here.
BEFORE APPLYING
Your FIDO account will only display eligibility for certification once you have met ALL requirements for a specific discipline/level.
If you have ever tested with the commission or held certification, please do not create a new FIDO account if you are unable to log in. Contact the commission at 512-936-3838 for assistance.
Log into your FIDO account to check your current eligibility or to create an account.
REQUIREMENTS
To become certified in Fire Officer IV you must:
- Hold Basic Structural Fire Protection, Aircraft Rescue Fire Fighting, or Marine Fire Protection AND Fire Service Instructor II certification AND Fire Officer III certification
- Document completion of ICS-400: Advanced Incident Command System
- Complete a commission approved Fire Officer IV training program
- Qualify for and pass the Fire Officer IV exam; you must have an unexpired exam score on file to qualify for certification
- Apply and pay for certification. The quickest option is to pay with a credit card.
You may be exempt from the exam requirement if you have never been certified and hold an IFSAC seal or TEEX Proboard certificate.
IFSAC SEALS
If you hold a Fire Officer IV IFSAC seal from another jurisdiction, you do not have to take the commission's Fire Officer IV exam.
Add this seal to your FIDO account by uploading a copy of each to the Submissions page, Register IFSAC Seal button.
TEEX PROBOARD
If you obtained a TCFP course completion certificate from TEEX indicating that your course was completed within the past 2 years, you may not have to take the commission's exam.
It is important to note that the certificate of completion must have the TEEX pro board seal number and the TCFP Training Prior Approval (TPA) number printed on the certificate in order to comply with §439.1 (2).
Add this certificate to your FIDO account by uploading a copy of each to the Submissions page, Register TEEX Proboard button.
PREREQUISITES
Hold basic structural fire protection, aircraft rescue fire rescue, or marine fire protection certification AND instructor level II certification AND fire officer III certification.
Document completion of ISC-400: Advanced Incident Command System. Upload this training through the Submissions page, Professional Development button in FIDO.
TRAINING
Complete a commission-approved Fire Officer IV training program as outlined in Chapter 9 of the commission's Certification Curriculum Manual or document completion of the required college course listed in 451.303(C).
View Chapter 9 (PDF) .
TESTING
Online Test Site Schedule
Check online testing sitesarrow_right_altRegional Testing Site Schedule
Check regional testing schedulearrow_right_altView Academy Examination Procedures here (PDF).
If your exam scores have expired, retesting is required to be eligible for certification (in addition to any other prerequisites). Contact the training and testing division of the commission at 512-936-3811 or testing@tcfp.texas.gov for more information.
If you have valid exam scores in FIDO, please continue to the next step.
APPLY FOR CERTIFICATION
Step 1: Log into FIDO.
Step 2: Click on the Applications on the left menu.
Step 3: Click on the green Apply button (if it is not green, you are not eligible).
Step 3: Follow the instructions to create an invoice.
Step 4: Click on Invoices on the left menu
Step 5: Click the green Pay link on the far right of the screen.
Step 6: Follow the instructions on Texas.gov to enter credit card information for payment to have certificate issued immediately.
VIEW AND PRINT CERTIFICATE
Step 1: Log into FIDO
Step 2: Click Records on the left menu
Step 3: Click Certifications within the green bar
Step 4: Click Print next to the name of the certificate. This will open a PDF that can be downloaded and saved or printed. The commission does not mail hard copies of certificates.
APPLY FOR IFSAC SEALS
An IFSAC Seal is available in this discipline. Steps to apply are found here.
Need Help?
Contact the certification and professional development section at their main phone number (512) 936-3820.